"Carpe Ventum"
2005 Beneteau Oceanis Clipper 373
Specifications
Description
The Beneteau 373 "Carpe Ventum" is an ideal bay sailor or coastal cruiser. She is a two cabin, one head layout, is a joy to sail, and has everything you need to cruise in comfort including:
- Reverse cycle air conditioning
- Fridge and freezer
- Windlass
- Furling main and jib
- Dinghy davits
- Chartplotter
- Autopilot
She is conveniently located in the water in Annapolis. There are only six of this popular model for sale in the USA and she is the only one in the mid-Atlantic.
Details 1
"Carpe Ventum" has the popular two cabin layout with 6'7'' headroom throughout. She has a large main salon with U shaped settee and dining table to port and straight settee to starboard. The V berth is forward with lots of light and ventilation. The galley is port side at base of companionway with head to starboard side with separate shower. Forward of the head is the forward facing Nav station. the large private aft cabin has a queen berth and hanging locker. Main salon has updated, light colored natural fabrics creating a nice, open feel. Ample storage underneath berths, settees, and cabinets throughout galley, berths, and salon. Numerous opening ports and hatches bring in lots of light and fresh air. Three 12VDC fans and factory installed 120VAC air conditioning provide additional comfort.
Details 2
The galley to port features:
- Two burner LPG stove with oven with cutting board top
- Front loading fridge and separate top loading freezer
- Double stainless sink with cutting board inserts
- Hot and Cold Pressure Water
- Origo Microwave Oven
- Vented cabinet doors and lots of storage space
Details 3
- 2005 Neil Pryde Dacron furling mainsail, 2005 Neil Pryde 140% Dacron furling genoa
- Asymmetric spinnaker with sheets and tack line
- Bimini and Dodger with Connector (needs repair)
- Sunbrella wheel and pedestal cover
- Anodized aluminum furling mast with boom
- Genoa furler with drum above deck
- Mainsheet with blocks
- Two genoa sheets, one genoa halyard, one mainsail halyard, one spinnaker halyard, one main boon topping lift, one genoa furling line, one mainsail outhaul, one mainsail furling line, one mainsail traveler
- Rigid boom vang
Details 4
- Raymarine ST6001 Autopilot
- Raymarine ST60 Tridata Depth sounder
- Raymarine ST60
- Raymarine C80 GPS Chartplotter at helm
- Raymarine Radar on transom mount mast with spreader light
- Raymarine ST60 Winder Instrument w/transducer at masthead
- Compass at Helm
- ICOM VHF Radio at Nav Station with Ram Mic at Helm
- Sony FM/AM/XM/CD with ipod interface
- TV with DVD mounted on bulkhead with masthead tv antenna (Needs re mounting)
Details 5
- Hand laid solid G.R.P. deck with balsa core plus thermal and acoustic insulation
- Solid fiberglass G.R.P. hull with fiberglass hull liner reinforced with unidirectional roving
- Stainless steel bow rail, bi-color navigation light
- Stainless steel stern rail w/horseshoe buoy holder and flagpole holder
- 6 x 24" Stainless Steel stanchions w/2 sets of lifelines and gates
- (2) teak grab rails on the coach roof
- Extruded perforated aluminum toe rails
- Stainless steel stem head fitting w/anchor roller and fairlead
- Delta anchor w/chain and rode
- Lewmar Electric Anchor Windlass
- (4) Fairleads on the beam and in the stern
- (6) anodized aluminum mooring cleats
- Self-bailing anchor well
- (2) Genoa Sheet tracks with adjustable cars
- Genoa Sheet turning blocks with stoppers
- Mainsheet traveler track with car on the coach roof
- (6) deck-stoppers for halyards, furling lines, vang and mainsheet
- (1) Lewmar 30 self tailing winch on cabin top, port side
- (2) 48 self tailing primary jib winches
- (1) Adjustable dorade-type vent for ventilation
- (1) Cockpit locker life-raft stowage
- (1) Lazarette locker
- (1) Locker for two gas bottles, complying w/ safety standards
- Self-bailing cockpit
- Pivoting patented wheel on pedestal w/instrument panel
- Compass and engine control lever on steering pedestal
- Removable varnished wooden drop-leaf cockpit table
- 12-Volt console light
- Drink Holders
- Engine instrument panel on coaming
- Plexiglass cover
- Access to swim platform by tilting helmsman's seat
- Teak-inlaid transom skirt with protective rubber strip
- Teak-inlaid swim platform
- Stainless Steel boarding ladder with plastic steps
- Stern light
- Teak inlaid cockpit seats
- (2) Teak steps on coaming for access to side decks
- (1) Winch handle holder
- (2) Winch Handles
- (2) 30A Shore Power receptacle on the transom
- Port and starboard drop down seats in stern corners
- Cockpit Shower
- Electric Bilge Pump
- Cockpit Cushions
Details 6
- 2X 30A Outlets on Transom
- 14 DC Circuit Breakers
- Six 110 Volt Outlets
- 2 (105A and 200A) batteries
- 20A Xantrex Truecharge Battery Charger
- 1000 Watts inverter with single 110 Volt cable outlet
- Reverse Cycle Heat and Air
Details 7
- Docklines and Fenders
- Misc Coast Guard Safety Equipment
- Dinghy Davits
- Stern seats that fold up
- Cockpit table
- Pivoting wheel to make more space in cockpit
- Inflatable dinghy and OB (negotiable)
Details 8
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


